I knew this day had to come. I sold her tonight. I won't use this time to reminisce too much. We had a good run with lots of great memories, but it was the Corobra's time to go. I knew I was selling it to a good guy, but I was for sure when I went to lay the money down after the sale and noticed he had kept with tradition, scibbling on the bank envelope simply "Corobra $".
Monday, April 18, 2011
The End of an Era: Corobra Finds New Home
I knew this day had to come. I sold her tonight. I won't use this time to reminisce too much. We had a good run with lots of great memories, but it was the Corobra's time to go. I knew I was selling it to a good guy, but I was for sure when I went to lay the money down after the sale and noticed he had kept with tradition, scibbling on the bank envelope simply "Corobra $".
Saturday, April 2, 2011
Newest Member of the Vibrator Club


About three months ago, I started looking for a new car. I knew I wanted a small 4 cylinder, something that would get good gas mileage, and preferably a wagon. I also wanted something with dark interior, an automatic of course, and something with AIR CONDITIONING. I looked at a lot of cars and did a lot of searching and researching over the last three months.
I kept coming back to the Pontiac Vibe. 1.8L, 4cyl. Rated at 29/36 mpg. The Vibe has lots of neat features like the 110 volt outlet, fold flat rear seats, the front passenger seat that folds flat (ideal for a laptop). The Vibe also sits a little more upright that most compact sedans, so it's a little easier to get in and out of. This one even has the sunroof!
Now I am the LAST person who would recommend owning a Pontiac / GM product. However, something you may not know is that the Vibe was built alongside the Toyota Matrix at the NUMMI assembly plant in Fremont, California. And the Vibe and Matrix are built on the Corolla platform with the Matrix power train and drive train. The is the closest there there is to a contemporary Corolla wagon without buying the less attractive Matrix. I'm all about the Corolla, as you all know. The Vibe gets good reviews, has built a good reputation for itself, and is less expensive that a Corolla of comparable age and mileage.
So, I located a good one at a large Chevrolet dealership up in Des Moines, Iowa. I drove up today (420 miles round trip) and pulled the trigger. Found this beauty with a mere SIXTY THOUSAND miles on the odometer. It's a 2003 model. I talked them down from retail and basically got it for what Kelley Blue Book considers "private party price". That's okay with me. Clean one-owner, no-accident CarFax and I was allowed to inspect it closely on the lift prior to purchase.
I'm the proud new owner of this 2003 Pontiac Vibe and the newest member of what my two female Vibe-owning coworkers fondly refer to as "The Vibrator Club".
Monday, January 31, 2011
Blizzard at Chuck's House!
Saturday, November 6, 2010
A True Comedy of Errors....
I put wrenching into at least three categories. I'm sure there are more, but the ones that come to mind are (1) plumbing, like radiators and such (2) precision stuff, like valve adjustments, and (3) knuckle busters, like struts and other suspension issues. I knew it would be a knuckle buster going into it today. Start with a hammer and then get a bigger hammer.

The first strut installed was really pretty easy. The only tricky part was the brake hanger. I tried chiseling it off there, but that didn't work so well. Trying to break the metal off the side of the strut with the chisel seems like it would work, but that was unsuccessful. I found that starting a cut with the hack saw and then using the chisel as a cutting tool was the best method. That chisel cuts through the metal quite well. And the nice thing is that it left a downward pointed barb toward the end of the cut. That barb then went down into the eyelet on the new strut (the eyelet meant for the brake line). Once the strut was installed, I just set the old part on top of the new, the barb held it in place, and then followed with a hose clamp. The hose clamp was Joe's idea and it worked like a charm. Very solid mount. Great solution.

One fun trick I learned / used was that the bolts on the top of the strut, since they didn't line up just perfect with the holes in the strut housing of the car, had to be coaxed into place. I could see the bolts sort of start into the holes, but they wouldn't go. It was just slightly too tight of a fit. So, I attached the bottom of the strut and lowered the car down onto the tire and the force popped the top of the strut up through the holes. POP! All done. Then just put the nuts onto the posts.

The first side took me about two hours. Pretty good I thought. The way these things go, I was kind of thinking I would burn through the second in maybe half the time. "Sit back, relax, enjoy this, Douglas," I thought to myself, "You've got this job under hand."
Well, wouldn't you know it. I sort of suspected maybe I got lucky on the first side. I didn't use a torch or anything and I was able to break those two big bottom bolts free. Just a pipe on the end of a regular 3/8 inch drive ratchet did the trick. But, on the second side, I actually broke the ratchet. It just jammed up. I guess the internals get jammed and it's dead after that. I tried a second ratchet and actually broke the nub off the thing where the socket attaches. Okay....so this isn't going well. I read in some forums and I was told by some people that I might need to use a torch on those big bolts to get them loose. Oh well, to be expected. I don't have a torch, so I ran to Walmart on the ZRX. Bought a new ratchet and a torch and some of the spray lube for loosening rusty parts. In this next pic, you can see one of the two big bolts to which I am referring. Actually, this is a pic of the side I was having trouble with.

Torch, torch, torch. Push, push, push. Bolt isn't budging. Spray some of the stuff on. Bang with hammer. Torch, torch, torch. POW! There's goes my third ratchet. Broken. That's okay......that wasn't the new one I bought. We're still good. One more left. No biggy. I AM LITERALLY RATIONING RATCHETS AT THIS POINT BECAUSE I AM BREAKING THEM SO PREDICTABLY. Torch, torch, torch. Hammer, hammer, hammer. Time for my ace in the hole.....my new ratchet. I bent a pipe I was using as a breaker bar, so I scavenged a HUGE pipe off my front work stand. New ratchet, enormous breaker bar. POP!!!! Fourth broken ratchet. Fuck!
Hey wait a minute..... I turned the car around to do this side. I was pushing on the other side, that means I should be.........pulling on this side. Jesus H Christ, I have been tightening this whole time. It took me FOUR ratchets to realize....oh yeah, righty tighty, lefty loosey. Below is a pic of the four broken ratchets....casualties of an idiot mind....

So I'm out of ratchets and down to my box wrenches at this point. I torch and low and behold....with a LOT of whacking with the hammer on the open end of the box wrench I was able to get the top bolt free. Luckily, I hadn't had much access to the bottom bolt, so I didn't get a chance to tighten it beyond belief like i had the top one. Also, another little bit of silver lining here is that at least I broke the ratchets instead of breaking a bolt or rounding the bolt off. No parts on the car itself were actually damaged in this tsunami of stupidity. THAT I consider to be QUITE A BLESSING and is what allowed me to retain my sense of humor about the whole ordeal.
Okay. So, we're cooking now. I use my top strut mount bolts trick and that works like a charm. I attach the brake line, sway bar, the two big bolts. And then back on with the wheel. I give the lug nuts one last good tug and the whole assembly drops like something broke. OH SHIT! This can't be good.
Of course it didn't take me long to realize I had not actually bolted the strut in at the top. I had gotten the posts through the holes and then moved on to the bottom because that's the order the book suggests. Only I never went back and actually screwed the top in.
So back off with the wheel. Only now I can't find the nut and the bolt that secure the top of the strut. They are NO WHERE to be found. In fact, I can't even remember taking the new ones out of the top of the strut. That's when I hear the faint laughter. I inspect the strut housing and discover that I left them IN the new strut. I cannot believe this! I immediately worry that I am going to have to COMPLETELY remove the new strut ENTIRELY. Luckily.....by the grace of JEBUS almighty, I was able to just pull down on the whole assembly and remove the two nuts and the one bolt. It was a tight fight, but I was able to jam my arm and hands up there to retrieve them. And low.....the offending bolts....

And believe it or not, I was able to actually tighten the top of the strut down this time. Impressive...

Now, aside from breaking FOUR ratchets because I didn't remember righty tighty lefty loosey, and aside from completely failing to bolt in the top of one of the struts, and aside from leaving vital hardware attached to the new strut and then having to retrieve said hardware like I was birthing a breached baby calf.....I would say today was a huge success. The job took me about 6 hours and a few busted knuckles, but I saved myself a good five or six hundred bucks. The pair of struts only cost me $190 SHIPPED off Ebay and I had the job priced out at two shops between seven and eight hundred dollars. Well worth it in my opinion.
Took the car out for a test drive tonight and the ride is much improved and way quieter. The front struts don't look bad, but they've got 165k miles on them as well. So, I'll probably be doing those soon enough. Thanks to Joe for his idea on how to attach the brake line without opening the line.
The first strut installed was really pretty easy. The only tricky part was the brake hanger. I tried chiseling it off there, but that didn't work so well. Trying to break the metal off the side of the strut with the chisel seems like it would work, but that was unsuccessful. I found that starting a cut with the hack saw and then using the chisel as a cutting tool was the best method. That chisel cuts through the metal quite well. And the nice thing is that it left a downward pointed barb toward the end of the cut. That barb then went down into the eyelet on the new strut (the eyelet meant for the brake line). Once the strut was installed, I just set the old part on top of the new, the barb held it in place, and then followed with a hose clamp. The hose clamp was Joe's idea and it worked like a charm. Very solid mount. Great solution.
One fun trick I learned / used was that the bolts on the top of the strut, since they didn't line up just perfect with the holes in the strut housing of the car, had to be coaxed into place. I could see the bolts sort of start into the holes, but they wouldn't go. It was just slightly too tight of a fit. So, I attached the bottom of the strut and lowered the car down onto the tire and the force popped the top of the strut up through the holes. POP! All done. Then just put the nuts onto the posts.
The first side took me about two hours. Pretty good I thought. The way these things go, I was kind of thinking I would burn through the second in maybe half the time. "Sit back, relax, enjoy this, Douglas," I thought to myself, "You've got this job under hand."
Well, wouldn't you know it. I sort of suspected maybe I got lucky on the first side. I didn't use a torch or anything and I was able to break those two big bottom bolts free. Just a pipe on the end of a regular 3/8 inch drive ratchet did the trick. But, on the second side, I actually broke the ratchet. It just jammed up. I guess the internals get jammed and it's dead after that. I tried a second ratchet and actually broke the nub off the thing where the socket attaches. Okay....so this isn't going well. I read in some forums and I was told by some people that I might need to use a torch on those big bolts to get them loose. Oh well, to be expected. I don't have a torch, so I ran to Walmart on the ZRX. Bought a new ratchet and a torch and some of the spray lube for loosening rusty parts. In this next pic, you can see one of the two big bolts to which I am referring. Actually, this is a pic of the side I was having trouble with.
Torch, torch, torch. Push, push, push. Bolt isn't budging. Spray some of the stuff on. Bang with hammer. Torch, torch, torch. POW! There's goes my third ratchet. Broken. That's okay......that wasn't the new one I bought. We're still good. One more left. No biggy. I AM LITERALLY RATIONING RATCHETS AT THIS POINT BECAUSE I AM BREAKING THEM SO PREDICTABLY. Torch, torch, torch. Hammer, hammer, hammer. Time for my ace in the hole.....my new ratchet. I bent a pipe I was using as a breaker bar, so I scavenged a HUGE pipe off my front work stand. New ratchet, enormous breaker bar. POP!!!! Fourth broken ratchet. Fuck!
Hey wait a minute..... I turned the car around to do this side. I was pushing on the other side, that means I should be.........pulling on this side. Jesus H Christ, I have been tightening this whole time. It took me FOUR ratchets to realize....oh yeah, righty tighty, lefty loosey. Below is a pic of the four broken ratchets....casualties of an idiot mind....
So I'm out of ratchets and down to my box wrenches at this point. I torch and low and behold....with a LOT of whacking with the hammer on the open end of the box wrench I was able to get the top bolt free. Luckily, I hadn't had much access to the bottom bolt, so I didn't get a chance to tighten it beyond belief like i had the top one. Also, another little bit of silver lining here is that at least I broke the ratchets instead of breaking a bolt or rounding the bolt off. No parts on the car itself were actually damaged in this tsunami of stupidity. THAT I consider to be QUITE A BLESSING and is what allowed me to retain my sense of humor about the whole ordeal.
Okay. So, we're cooking now. I use my top strut mount bolts trick and that works like a charm. I attach the brake line, sway bar, the two big bolts. And then back on with the wheel. I give the lug nuts one last good tug and the whole assembly drops like something broke. OH SHIT! This can't be good.
Of course it didn't take me long to realize I had not actually bolted the strut in at the top. I had gotten the posts through the holes and then moved on to the bottom because that's the order the book suggests. Only I never went back and actually screwed the top in.
So back off with the wheel. Only now I can't find the nut and the bolt that secure the top of the strut. They are NO WHERE to be found. In fact, I can't even remember taking the new ones out of the top of the strut. That's when I hear the faint laughter. I inspect the strut housing and discover that I left them IN the new strut. I cannot believe this! I immediately worry that I am going to have to COMPLETELY remove the new strut ENTIRELY. Luckily.....by the grace of JEBUS almighty, I was able to just pull down on the whole assembly and remove the two nuts and the one bolt. It was a tight fight, but I was able to jam my arm and hands up there to retrieve them. And low.....the offending bolts....
And believe it or not, I was able to actually tighten the top of the strut down this time. Impressive...
Now, aside from breaking FOUR ratchets because I didn't remember righty tighty lefty loosey, and aside from completely failing to bolt in the top of one of the struts, and aside from leaving vital hardware attached to the new strut and then having to retrieve said hardware like I was birthing a breached baby calf.....I would say today was a huge success. The job took me about 6 hours and a few busted knuckles, but I saved myself a good five or six hundred bucks. The pair of struts only cost me $190 SHIPPED off Ebay and I had the job priced out at two shops between seven and eight hundred dollars. Well worth it in my opinion.
Took the car out for a test drive tonight and the ride is much improved and way quieter. The front struts don't look bad, but they've got 165k miles on them as well. So, I'll probably be doing those soon enough. Thanks to Joe for his idea on how to attach the brake line without opening the line.
Monday, October 25, 2010
HWY 221 ZRXOA Fall Rally Eureka Springs (09/24/10)
Following Neal back to Eureka Springs from Brushy's Corner after Roland's off.
Labels:
221,
Eureka Springs,
Fizzy,
FZ1,
hooliecrew,
ZRX,
ZRXOA
Push Mountain Rd. ZRXOA Fall Rally Eureka Springs (09/23/10)
Push Mountain Rod. from HWY14 heading north, running it to just over the crest of the hill.
Labels:
crew,
Eureka Springs,
Fizzy,
FZ1,
hooliecrew,
Push Mountain Rd.,
ZRX,
ZRXOA
Monday, October 18, 2010
SUFJAN STEVENS
If you see one show this year, I can almost bet it will NOT be this one. You'll be missing something though. I had a coworker ask me to go to this so I checked his older stuff out on the net. Had plenty of banjo in it, so I thought, "What the heck for $35." All his stuff last night was new - and in Sufjan's words and my opinion - experimental. I knew almost nothing that was played. However, I can say that this was probably the best live show I have ever attended in my life. I had made this decision about three songs into the evening. There just seemed to be a tremendous energy in the music. At times, I would think, why do I like this so much? What are they doing up there that I dig so dang much? And it wasn't the banjo, because he put that down after this first song and never touched it again the rest of the night. What a fantastic show. Just amazing.
Sunday, October 10, 2010
New Radiator Installed Successfully.
I received the new radiator in the mail Monday. Installed it Wednesday with no real problems. I put straight water in there, though Jody very wisely told me that I should be careful just not to tell anyone that. Thanks for the tip, Jody. Anywho, I rode the bike to work Friday and maybe put a total of 35 to 40 miles on the bike like that.
So today I took the time to flush the system and put the proper coolant and water mix in there. Figured I would share the process. I was able to pull the tank BACK about 6 to 10 inches and didn't even need to pull it completely off the bike....that way I was able to use the fuel source as a fuel source without rigging something up. No one has ever mentioned this, but it works fine as long as you take the fuel drain line off the back of the tank. That's all you need to disconnect. And with the bike on the rear stand, you can turn the handle bars to the left, and you have plenty of room to pour from a gallon jug into a funnel in the filler neck.
PROCESS. I removed the rad cap, started the bike, and then removed the drain plug at the bottom. Back to the top and I started pouring water in as water drained from the bottom. Turned the bike off when the gallon jug got low. Rushed down and replaced the plug. Topped the rad back off with more water. Started the bike again. Ran the bike until water in filler neck got hot. Then pulled the plug again. Filled from filler neck as water drained from the bottom. (I was careful to never let the water drain out completely, which prevented me from having to bleed from the water pump each and every time.) I did several slightly different variations of this and used a total of maybe 6 or 7 gallons of water until the water ran good and clean with minimal particulates left over from the Alumaseal that I put in there at the rally. It was interesting how when I would pull the plug, hot water would be draining at first but by the time I was near the bottom of the jug, cold water would be coming out at the bottom. Anyway..... I did have the fleeting thought....I hope these temp changes in water don't crack my head in like 12 different places. I'm not really smart enough to know if that could happen, but it just flashed in my head as an epic thread on the OA.
When I finally put the coolant mix in there, I let about 6 to 8 cups drain straight through in hopes that that would displace any straight water that might have been left in there. I did clean and refill the reservoir bottle as well. And of course I bled air from the water pump and thermostat housings. And I plan to check my ratio mix for freeze level with a tester later in the week. I'll be road testing the bike this week to make sure all is fine. But it seems to be a good fix thus far.
Monday, October 4, 2010
Look What Daddy Got....
It's one thing when you get a plain brown package on your door step and you think....."Oh, sweet, my radiator came."

And then it's a whole other thing when you carefully cut that boring brown box open and you realize....I just entered the world of aftermarket parts, aka the mod world. That red box is downright impressive.

I pulled the rad out completely and it looks real good. Appears to be straight; I did the Jody-laying-it-on-a-flat-surface test.

Pics of the replacement to follow, as well as other updates.
And then it's a whole other thing when you carefully cut that boring brown box open and you realize....I just entered the world of aftermarket parts, aka the mod world. That red box is downright impressive.
I pulled the rad out completely and it looks real good. Appears to be straight; I did the Jody-laying-it-on-a-flat-surface test.
Pics of the replacement to follow, as well as other updates.
Sunday, September 19, 2010
Went Hiking and almost stepped on a THIS.....
So I set out hiking yesterday. I hit Weston Bend State Park, which overlooks the Missouri River. The trail I chose evidently hadn't been walked in a few days because I fought spider webs across the trail the whole way. I hate that. I had to use a branch held out in front of me to cut down the webs so I wouldn't get tangled up every few feet. Anywho, on my way back DOWN the trail and moving at probably a slightly quicker clip, I stopped well in advance of these copperheads. They had crawled out and were lying dead square in the middle of the trail. I proceeded around them with extreme caution and only took the picture after passing safely.

I also saw this creature, which wouldn't stop moving long enough for me to take a decent pic.
I also saw this creature, which wouldn't stop moving long enough for me to take a decent pic.
MORE TO THE STORY.....
After I obtained my urban tapestry, about a week later, I passed the scene of the first acquisition, and I was pleasantly surprised to find a second tag. This time it was on the back of the mattress. So out comes the carpet knife and now I have the companion piece of artwork.
But then I started seeing this "Olivera" tag all over midtown. So I took a few pictures. Actually, most of these other tag pics were taken within a stones throw of Steve's house. (If you have to ask who Steve is, you don't read the blog often enough.)
This next pic, which is poor resolution because it was taken with a cell phone, was taken in the bathroom at Wesport Coffee House where I play Scrabble. The presence of the tag caught me by surprise, but the symbols below it were of even more significance. The "$O$" is the name of the Die Antwoord album that was recently released - their debut album. Most of you will have never heard of Die Antwoord. However, Die Antwoord is responsible for the quote on the pic at the top of the Blog: "You picked the wrong Ninjas to fuck with." And low we have come full circle. Did I just BLOW YOUR MIND???

Wednesday, September 15, 2010
Sunday, September 12, 2010
Speaking of the People's Republic.....

As I was driving to and from Tennessee recently, I had a concern for my safety. Over the 800 miles, there are plenty of high speed bumps....plenty of places to loose the tail end of the Corobra because of the crapped out struts in the rear. It really is pretty bad. I haven't had any scares or close calls, but I can sometimes feel the back of the car wanting to go its own way. And the thought occurred to me that it would be pretty bad to have an accident and injure myself because I wasn't willing to spend the bucks to fix the ol' girl. What would make it worse is that I have the money; I'm just reluctant to spend the seven or eight hundred dollars to get it done.
So, I found out that one option is to replace the whole strut and spring assembly. They're called Quick Struts and they can be had on Ebay for quite a fair price. I can get the set for the rear for under $200 shipped. Anyone see anything wrong with this? I imagine this would be just a few bolts and voila! The quick struts for that price aren't Monroe or anything name brand, but the sellers have good ratings and anything has to be better than the crapped out struts I have in there. And on top of everything else, I think it would be fun to fix this. Get a little wrenching in in my kick-ass conditioned garage space.
Saturday, September 11, 2010
The Hulk - Universal Studios Orlando
What a ride!
Labels:
Orlando,
roller coaster,
The Hulk,
Universal Studios
Sunday, August 15, 2010
"I told you - damn it - ENOUGH with that infernal racket!"
Since I moved to my new place, I take walks in the evening as often as I can. Typically I'm out for an about an hour. It's a very cool neighborhood. Anywho, I should have been "blogging" all summer about all the cool stuff I've seen. For example, I came across this scene tonight.
Shameless repost below:
Sunday, August 8, 2010
wwwelp…..I joined a gang.
Faced with the void after recent life events, I turned to Craig’s List on a hot and lonely summer weekend. In the “Community Groups” section along with blue hairs looking for a friendly game of rummy, I found an ad with the title, “Let’s do some crime.” It seemed clever, funny, fresh, and oh so enticing to an impressionable young man of 36 years. It started out as a friendly get together, a few forties at a block party in the worst part of town. The next morning, I wake up wearing a wife beater t-shirt sporting a fresh tattoo (of poor quality, might I add) and a nickname; they chose “Sling Blade” evidently due to my southern accent. But the kicker is they’re actually a really cool group of guys. They get me. I mean they really get me. They’re as fed up with the rat race as I am. Not only do they not ask me about my “bucket list”, but I haven’t found anyone in the gang who even knows what that is. 401K? Please. These guys – nay WE are living in the moment. Health insurance? Try life insurance. Heck, most of these guys have never even met someone as old as me, much less expect to reach my age. Yep, I’ve found my group of fellas, my homies, my new family.
Actually, the real story behind this new garage adornment (what I have dubbed an Urban Tapestry) is that I saw this painted on a curb-discarded box spring in midtown. I passed it and admired it for a few days and then it occurred to me that I could simply cut the material off the box spring. And so I did. Brought it home and hung it in my garage. After hanging it, it dawned on me that the top part reads “OLIVERA”…perhaps a last name. While the bottom is still a mystery, it kind of looks like “PSTE”. Any help in deciphering would be much appreciated.
Saturday, July 17, 2010
A tad dramatic...
Perhaps, but it does sum up how I feel right now. Even through the pain I feel like there is improvement in my range of motion and less "tightness" in my joint which was being caused by the thickened bursa. Might be too early to get my hopes up but I am trying to stay positive. The fact that I won't be immobilized for 6 weeks has gotten me excited enough to start looking towards the next Roadeo!
Monday, July 12, 2010
Nothing Really Mattress
Tuesday, June 22, 2010
Subscribe to:
Posts (Atom)
